HPSC1
- Interface: Ethernet
- Number of output channels: 1
- Flash current: max. 40A @ 48V
- Continuous current: max. 5A @ 24V
- Pulse width: 1µs to 1000ms (resolution 1µs)
HPSC2
- Interface: Ethernet
- Number of output channels: 2
- Flash current/channel: max. 40A @ 48V
- Continuous current/channel: max. 5A @ 24V
- Pulse width: 1µs to 60s (resolution 1µs)
HPSC4
- Interface: Ethernet
- Number of output channels: 4
- Flash current/channel: max. 40A @ 48V
- Continuous current/channel: max. 5A @ 24V
- Pulse width: 1µs to 60s (resolution 1µs)
IPSC1
- Interface: Ethernet
- Number of output channels: 1
- Flash current: max. 20A @ 200V
- Continuous current: max. 2A @ 30V
- optionally assembled cable harnesses
IPSC2
- Interface: Ethernet
- Number of output channels: 2
- Flash current/channel: each max. 10A @ 200V
- Continuous current/channel: max. 1A @ 30V
- optionally assembled cable harnesses
IPSC4
- Interface: Ethernet, RS232
- Number of output channels: 4
- Flash current/channel: each max. 10A @ 200V
- Continuous current/channel: max. 1A @ 30V
- optionally assembled cable harnesses
- Currents of up to 20 A per module
- Modular, expandable design with 1-16 channels
- Configuration via integrated web page
- Ethernet and serial interface
- integrated error detection
I-SWITCH
- retrofittable switching input for 24V illumination
- PNP and NPN version available
- Drive current 3.7 - 24V
- max. Load current (lighting) 2.5A
- Compact design for looping into the supply line of the lighting system
I-CON
- retrofittable brightness control for 24V illuminations
- Dimming via potentiometer and/or control voltage 0-10V
- different power levels up to 1.2A available
- Compact design for looping into the supply line of the lighting system